mini UHT sterilizer yc-02

mini UHT sterilizerYC-02  is manufactured for simulating industrial manufacture and research in laboratory,completely duplication the industrial production, which is adaptive to wide ranges of viscidity, and be same with preparation of fibers and granules, precisely mimic prepare, homogenizing, aging, pasteurism, fast sterilization under ultra-temperature and aseptic filling. The whole system is integrated with the CIP and SIP online, which can be configured optionally a homogeniser and a aseptic filling cabinet on your needs.

YC-02 mini UHT sterilizer Application

Such as beverage,fruit juice, fresh milk, yogurt,tea, sauce dressings, soups and so on.

YC-02 mini UHT sterilizer technical parameter

1.Capacity of material processing :20 L per hour (Highly available by your demand).

2.Heating to 150 ℃ at the flow rates stated.

3.Cooling to below 5 ℃ at the flow rates stated.

4.heated hot water recirculators，no steam required

5.PLC controller, 8 inch LCD touch screen,two modes of run: Automatic-mode, and Eye-monitored mode for the purpose of easily controlling experimental process .

6.Temperature Precision:±0.5℃

7.The times of sterilizing include :3S，5S，10S，30S，300S(optional)

8.Product system pressures to 10 bar.

9.SIP (Sterilise In Place) an option for Aseptic sampling.

10.Built in true CIP (Clean In Place), flow for CIP more than 400 Ltr per hour

11.Outlet temp. adjustable by request.

12.Each heating section is individually controlled to enable a wide setting of product temperatures，the product is heated by pressurised hot water recirculators which are PID controlled for greater stability and accuracy(the precision of sterilizing temperature is ±0.5℃) . The cooling is in 1 or 2 stages dependant on the final cooling temperature required.

13.380 volt 3 phase, 50 or 60 Hz.

14.Power:13 KW

YC-02 mini UHT sterilizer technological flow

（1）Tube preheating & sterilizing: to sterilize the tube by superheated water and last for some time, then chill out to normal temperature and stand by.

(2) Material sterilizing: to ensure the sterilizing temp. & time according to experiment requirement(In line homogeniser can be added either upstream or downstream).

(3) Aseptic filling: hot filling or normal temp. filling based on laboratory needs.

(4) CIP cleanup .

Material→ hopper→screw pump→preheating tube→(homo.) →sterilizing tube(137～150℃）→water-cooling→(homo.)→(→ice-cold)→aseptic filling

Sr.no	Parameter	Pilotech YC-02 uht sterilizer
1	Power	13KW ,380V ,50/60Hz
4	Rated capacity	20-25l/h
5	Min. sample	3-5L
5	Max. heating temperature	150⁰C
6	Cooling temperature	normal temperature  or 5⁰C(optional)
7	Heating unit	Heat hot water recirculators
8	Temperature control	PID control
9	Heating precision	±0.5⁰C
10	Sterilizing time	3s 5s 10s 30s   300s(optional)
11	System pressure	10Bar
12	Sterilize	SIP an option for aseptic sampling
13	Clean	CIP( 400LPH)
14	Outlet temperature	adjustable
15	Dimensions	1150*910*1650mm
16	Operation mode	Automatic/Manual
17	USB connector	Yes
18	Body material	SUS304 Stainless steel
19	Filling system	Sterile cabinet(optional)
20	Filtering membrane	HEPA (filter efficiency 99.99%)
21	PET bottle	suitable
22	Jacketed filling device	10L(5L)
23	Filling valve	Air operated filling device
24	Ozone generating system	optional
25	Material touch part	SUS316L
26	Operation mode	Automatic/Manual
27	Display	7-Inch LCD display